Using our popular SXTN stem as a springboard, Aaron Ross’ signature BOSS stem is a classic top load design with 52mm of reach and a 35mm rise. FEATURES Six bolt clamping configuration Headset pre-load bolt recess (32mm diameter) 6061-T6 aluminum, CNC machined SPECS 52mm reach 35mm rise 11 oz
Watch this quick video to learn more about Tom Dugan’s signature stem. Available now! Using our popular SXTN stem as a springboard, we updated Tom Dugan’s signature stem with a classic top load design. The DGN stem has 51mm of reach and a 28mm rise. FEATURES Six bolt clamping configuration Headset pre-load bolt recess (32mm […]
Watch this quick video to learn more about our Broc Raiford signature RAFT stem. Available now! FEATURES Six bolt clamping configuration Headset pre-load bolt recess (32mm diameter) 6061-T6 aluminum, CNC machined SPECS 50mm reach 30mm rise 11.4 oz
Come celebrate our 30 Year Anniversary on December 5th. All info on the flyer. BRING YOUR HELMETS if you’re riding. Come ride the Full Factory ramps, chill and have a good time. We will also be showing the new “30•15” video when the sun goes down. Spread the word!
Gary Young is the perfect candidate to be teaching the lesson. Legend.
One of the most important goals that we had when we sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. We also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the hassles of brake […]
Doing it for Volume on this one. Stop reading and enjoy!
Watch as Jim Bauer walks you through the installation process for our Socket Drive™ Thunderbolt cranks and corresponding sprocket. For those who might be unfamiliar… In a nutshell, the Socket Drive™ system is a 9 sided interface which eliminates the need for a sprocket bolt. The sprocket itself is machined so there is no need […]
It’s always good when new Hawk footage surfaces. Here’s Chase doing what he does best on his new setup, courtesy of Cult. Enjoy!
All the pegs and all the brakes. Here’s Adam delivering you a fresh batch of freestyle courtesy of S1 Helmets.
Product Video: Aaron Ross BOSS Stem December 01, 2015
Product Video: Tom Dugan DGN Stem November 24, 2015
Product Video: RAFT Stem November 17, 2015
Odyssey Anniversary Jam / 30•15 Premiere November 13, 2015
Learn Tabletops from Gary Young November 11, 2015
PRODUCT VIDEO: Ghost Pad November 09, 2015
Broc Raiford is Good. November 04, 2015
Product Video: Socket Drive™ System November 03, 2015
Chase Hawk / Cult Bike Check November 02, 2015
Adam Banton / S1 Helmets October 30, 2015
